NEW PATENT PENDING VMS Racing 27 piece (9 BULLET SPIKES, 9 threaded cup washers & 9 stainless steel allen bolts) VMS Racing BULLET Header Bolt Cup Washer Kit. VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW PATENT PENDING BULLET Metric Header Bolt Cup Washer Kits for all Honda/Acura B/D/F/K and H engines! These kits come finished in anodized red, blue, purple, black, gunmetal, green, orange, gold, chrome and neo chrome. The VMS Racing Honda/Acura BULLET Header bolt cup washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC Machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!Fits the following vehicles:• ALL Honda/Acura 4 cylinder B/D/F/H/K series engines. IMPORTANT NOTE: You will need to put a tiny amount of Locktite (not included) on the threads of the cup washers, if not the vibration can loosen the spikes and they can fall off. Also look at your header, THESE WILL NOT FIT EVERY HEADER OUT THERE, as if you have a sharp turn on the tube it may hit one or more spikes. So please verify your header before you order. ...

More details ➞

   VMS Racing 8 piece (3 cup washers, 3 Stainless bolts and 2 bullet spikes) Distributor Bullet Spike Cup Washer Kit.       VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW Metric Bullet Spike Cup Washer Kits for all Honda/Acura Distributors! These kits come finished in anodized red, blue, purple, black, gunmetal, green, orange and also triple chrome plated and neo chrome. The VMS Racing Honda/Acura Distributor Spike Cup Washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!  Fits the following vehicles: • ALL Honda/Acura 4 cylinder vehicles that have a distributor....

More details ➞

   VMS Racing 6 piece (3 cup washers & 3 Stainless Bolts) Distributor Cup Washer Kit.      VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW Metric Cup Washer Kits for all Honda/Acura Distributors! These kits come finished in anodized red, blue, purple, black, gunmetal, green, and orange. The VMS Racing Honda/Acura Distributor cup washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC Machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!  Fits the following vehicles: • ALL Honda/Acura 4 cylinder vehicles that have a distributor....

More details ➞

   VMS Racing 8 piece (3 cup washers, 3 Stainless bolts and 2 spikes) Distributor Spike Cup Washer Kit. Protected by US Patent # USD788574S.      VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW Metric Spike Cup Washer Kits for all Honda/Acura Distributors! These kits come finished in anodized red, blue, purple, black, gunmetal, green, orange and also triple chrome plated and neo chrome. The VMS Racing Honda/Acura Distributor Spike Cup Washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!  Fits the following vehicles: • ALL Honda/Acura 4 cylinder vehicles that have a distributor....

More details ➞

            VMS Racing 18 piece (9 cup washers & 9 Stainless Bolts) VMS Racing Header Bolt Cup Washer Kit.              VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW Metric Header Bolt Cup Washer Kits for all Honda/Acura B/D/F/K and H engines! These kits come finished in anodized red, blue, purple, black, gunmetal, green, and orange. The VMS Racing Honda/Acura Header bolt cup washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC Machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!Fits the following vehicles:• ALL Honda/Acura 4 cylinder B/D/F/H/K series engines....

More details ➞

VMS Racing 27 piece (9 SPIKES, 9 threaded cup washers & 9 stainless steel allen bolts) VMS Racing SPIKE Header Bolt Cup Washer Kit. Protected by US Patent # USD788574S. VMS Racing comes back to the rescue to help you add that last finishing touch to your engine bay with the NEW PATENT PENDING SPIKE Metric Header Bolt Cup Washer Kits for all Honda/Acura B/D/F/K and H engines! These kits come finished in anodized red, blue, purple, black, gunmetal, green, orange, gold, chrome and neo chrome. The VMS Racing Honda/Acura SPIKE Header bolt cup washers feature the world famous VMS logo. VMS Racing washer kits are made form CNC Machined billet aircraft grade aluminum with stainless steel bolts. Comes with everything you will need for a quick, easy, and clean installation!Fits the following vehicles:• ALL Honda/Acura 4 cylinder B/D/F/H/K series engines. IMPORTANT NOTE: We are now supplying these with o-rings that go between the cup washer and the spike. The pressure put on by the o-ring on the spike cap will keep it in place....

More details ➞

STAINLESS STEEL 4-2-1 HEADER FOR HONDA D-SERIES ENGINES INCLUDING D15 & D16 ENGINES. THESE HEADERS ARE MANUFACTURED USING THE HIGHEST QUALITY MANDREL BENT T304 STAINLESS STEEL, CNC STAINLESS STEEL FLANGES, TIG WELDED AND ARE THEN POLISHED TO A MIRROR LIKE FINISH. THE HEADER HAS A PRE-DRILEED O2 BUNG TO EASILY CONNECT FACTORY O2 SENSORS OR AFTERMARKET WIDEBAND SENSORS. COMES WITH PERFORATED ALUMINUM REINFORCED GRAPHITE GASKETS. THIS HEADER WILL GIVE YOUR ALL MOTOR SETUP A DRAMATIC INCREASE IN PERFORMANCE. SPECS: - INLET: 1.75" - OUTLET: 2"   FEATURES: -  T304 STAINLESS STEEL MANDREL BENT - STAINLESS STEEL CNC FLANGE - TIG WELDED - O2 BUNGS - INCREASED HORSEPOWER AND TORQUE   THIS HEADER WILL FIT THE FOLLOWING VEHICLES: - 88-91 HONDA CRX - D15 D16 - 93-97 HONDA DEL SOL - D15 D16 - 92-95 HONDA CIVIC - D15 D16 - 96-00 HONDA CIVIC - D16...

More details ➞

TRIPLE CHROME PLATED Vms Racing 2.5" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 2 1/2" inches.• Inlet: Dual 2 1/2" inches.• Center core: 2 1/2" X 4" inches.Features:• TRIPLE CHROME PLATED T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

RAW Stainless Vms Racing 2.5" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 2 1/2" inches.• Inlet: Dual 2 1/2" inches.• Center core: 2 1/2" X 4" inches.Features:• RAW T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

TRIPLE CHROME PLATED Vms Racing 3" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 3" inches.• Inlet: Dual 3" inches.• Center core: 3" X 4" inches.Features:• TRIPLE CHROME PLATED T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

RAW Stainless Vms Racing 3.0" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES. Measurements:• Length: 12" inches.• Outlet: Dual 3" inches.• Inlet: Dual 3" inches.• Center core: 3" X 4" inches.Features:• RAW T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞