GENUINE BOSCH 2200 CC HIGH IMPEDANCE FUEL INJECTORS. THE BOSCH FUEL INJECTORS REPRESENT THE NEXT GENERATION OF HIGH FLOW INJECTOR TECHNOLOGY WITH FAST RESPONSE TIMES, EXCELLENT FLOW PATTERNS AND COMPACT DESIGN. THESE INJECTORS ARE VERY WELL SUITED TO TURBOCHARGED AND SUPERCHARGED APPLICATIONS THAT SEE HIGH FUEL SYSTEM PRESSURES. THEY ARE ALSO SAFE TO USE WITH MOST FUELS INCLUDING ETHANOL (E85), METHANOL, GASOLINE, AND ALCOHOL. THESE FLOW 2200CC/MIN (210LB/HR) AT 43.5 PSI (3 BAR). TECHNICAL SPECIFICATIONS: - COIL RESISTANCE: 9.1 OHMS/ LOW IMPEDANCE - DEAD TIME: 0.45MS AT 14 VOLTS - STATIC FLOW RATE @ 43.5 PSI ( 300kPa ) W/GAS: 2200 CC/MIN = 210 LB/HR - STATIC FLOW RATE @ 58 PSI ( 400kPa ) W/GAS: 2550 CC/MIN = 240 LB/HR - STATIC FLOW RATE @ 78.5 PSI ( 500kPa ) W/GAS: 2865 CC/MIN = 273 LB/HR - STATIC FLOW RATE @ 88 PSI ( 600kPa ) W/GAS: 3155 CC/MIN = 300 LB/HR - STATIC FLOW RATE @ 101.5PSI ( 700kPa ) W/GAS: 3350 CC/MIN = 320 LB/HR - CONNECTOR: DENSO / SUMITOMO - INJECTOR LENGTH: O-RING TO O-RING: / 37.5 MM - INJECTOR BODY DIAMETER: 16MM - O-RING: 14.5MM VITON   INJECTORS COME WITH NO HARDWARE, ADAPTERS, OR HATS. THEY MUST BE PURCHASED SEPARATELY IF NEEDED. INSTALLATION OF THESE INJECTORS WILL REQUIRE THE USE OF A TUNED OR CHIPPED ECU. DYNO TUNING IS ALWAYS RECOMMENDED....

More details ➞

So you are building a high horsepower car (up to 500HP) and you do not want to change or cut up all your fuel lines just because your fuel filter is not up to the task. So what do you do?  VMS Racing comes back to the rescue with their stock replacement High Volume Fuel Filter that is capable of supporting fuel flow for vehicles with up to 500 horsepower! No need to cut or change your fuel lines anymore, just so you can use a high flow fuel filter that will not choke your engine of gas! The filter features a stainless steel 100 micron washable element. The filter body has Double O-ring seals  which deliver superior leak protection.  The filter is made of CNC Machined T6061 billet aluminum and is beautifully anodized in many different colors. This unit is a direct-fit replacement for most Honda/Acura vehicles and it can also be used as a  floating application on most any other vehicles.   DIMENSIONS: - TOP INLET THREAD: 12X1.25MM - BOTTOM INLET THREAD: 14X1.5MM - FILTER HIEGHT: 4" FILTER - DIAMETER 2.5" THIS FILTER WILL FIT THE FOLLOWING VEHICLES: - 94-01 ACURA INTEGRA -1995 HONDA CIVIC (WILL NOT FIT 92-94) - 96-00 HONDA CIVIC - 97-98 HONDA CRV - 92-96 HONDA PRELUDE - 97-01 HONDA PRELUDE - 94-97 HONDA ACCORD (4 CYLINDER ONLY) - 93-97 HONDA DEL SOL VTEC (B16 ENGINE ONLY) - Acura CL 97-99 (4 and 6 cylinder) - Acura RL 96-98 3.5L V6 - Acura TL 95-98 (4 and 6 cylinder)...

More details ➞

     VMS RACING TOP HATS ARE MACHINED FROM HIGH QUALITY CNC BILLET ALUMINUM AND ARE THEN ANODIZED FOR DURABILITY AND TO PREVENT CORROSION. VMS RACING TOP HATS ARE THE ONLY TOP HATS ON THE MARKET THAT ARE ANODIZED. SOLD IN SETS OF 4 PIECES       THE VMS RACING TOP HATS ARE DESIGNED TO ALLOW YOU TO USE OEM ACURA RDX INJECTORS ON B SERIES ENGINES. THIS INJECTOR SET UP IS A COST EFFECTIVE ALTERNATIVE TO EXPENSIVE AFTERMARKET INJECTORS AND IS A LOT SIMPLER AND MORE EFFECTIVE THAN THE DSM INJECTOR MODIFICATIONS. FEATURES: -CNC BILLET ALUMINUM ANODIZED FINISH TO PREVENT CORROSION - ADAPTS RDX INJECTORS TO B SERIES FUEL RAILS. SPECIFICATIONS: - O-RING SIDE - 10MM - TOP SIDE - 13MM - TOTAL LENGTH - 22MM WILL NOT FIT D SERIES FUEL RAILS!    ...

More details ➞

       Billet aluminum 90 Degree Fuel Pressure Regulator Relocator available in anodized black or gun metal.       The VMS Racing 90 Degree Fuel Pressure Regulator Adapter is CAD designed and precision CNC machined from a solid piece of aircraft grade 6061T6 billet aluminum. For use when you have installed an aftermarket fuel rail and you are having clearance issues with your fuel pressure regulator. This adapter raises and turns your fuel pressure regulator 90 degrees from the Stock Position. Fits the following engines: - Honda Acura B16, B17, B18, and H22 Engines.      ...

More details ➞

        Are you tired and frustrated of trying to find an easy solution to mount an external fuel pressure regulator on your Honda/Acura engine? Well VMS Racing comes back again to the rescue with their external fuel pressure regulator rail adapter!        The VMS Racing external fuel pressure regulator rail adapter is the fastest, easiest way to mount an external regulator on your fuel rail. You simply remove your stock, or stock type fuel pressure regulator from your fuel rail, and just bolt this adapter on to the place where the regulator used to be! The adapter has a barb end and you simply run a fuel hose from there to your externally mounted fuel pressure regulator. Barb can use 9MM or 3/8" ID hose. You will need to reuse your fuel pressure regulator o-ring on the rail adapter so that it seals to the fuel rail.        The rail adapter is CAD designed and precision CNC machined from a solid piece of aircraft grade T6061 Aluminum. It is then anodized in black for a long lasting finish and lifetime durability. Barb is made of Stainless Steel. ...

More details ➞