The Patented True Spike lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These lug nuts are available in 2 lengths, 41MM and 51MM: - All 12x1.5MM, 12x1.25MM, 7/16-20, 1/2-20 are 41MM long. - All 12x1.75mm, 14x2.0MM and 9/16-18 are 51MM long. The 14x1.5MM is available in both 41MM and 51MM. - All cars use 41MM, but they can use the 51MM if you want a little more length. - Most trucks need to use the 51MM. If unsure what you need for your truck always buy the 51MM as that one will always work. The 41MM will bottom out on the stud of some trucks. US Patent: D786,056...

More details ➞

    The Patented True Spike Locking lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber O-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The O-ring will put pressure on the cap when tightened down so that your caps will not fall off. Every set will come with one key to be able to install and remove them.     These lug nuts are available in 2 lengths, 41MM and 51MM. All 12x1.5MM, 12x1.25MM, 1/2-20 are 41MM long. All 14x2.0MM and 9/16-18 are 51MM long. The 14x1.5MM is available in both 41MM and 51MM. All cars use 41MM, but they can use the 51MM if you want a little more length. Most trucks need to use the 51MM although some like the Dodge Ram can use the 41MM. If unsure what you need for your truck always buy the 51MM as that one will always work. The 41MM will bottom out on the stud of some trucks. US Patent: D781,562...

More details ➞

              Yes, the patented (patent number D792,204 and D793,220) True Spike dually/semi truck 33MM lug nuts are finally here. As seen on the Diesel Brothers show on the Discovery Channel. After over a year of development we have finally been able to perfect the design and start production on these. The Diesel Brothers have gotten all the prototypes and they are on their personal trucks, "the Muscle", "Heavy D", and "Diesel Dave" all run these on their personal trucks.               The kit comes with 40 forged steel lug nuts and 40 CNC machined billet lug nut caps that are cut from a solid piece of T-6061 aluminum bar stock. The caps screw onto the lug nuts and there is a rubber seal that puts pressure on the cap so that they will not screw off. Please use rubberized gloves to screw the caps in and out. Please do not over-tighten.                 These will only fit trucks with wheel adapters to mount 10 lug real dually wheels. Will not work on direct fit dually wheels that do not use adapters.                WILL NOT FIT AMERICAN FORCE WHEELS WITH BILLET CENTER CAPS! Measurements of spike: - Length: 4.6" - Width:2"                Will not fit the American Force Dually front wheel that is an 8 bolt direct fit wheel. Will only fit their 10 bolt wheels with adapters. You can now buy our adapters with caps for the American Force Direct fit wheels here: - ADAPTERS WITH CAPS FOR AMERICAN FORCE DIRECT FIT WHEELS ...

More details ➞

         True Spike flat seat steel wheel adapter washers to True Spike Acorn lug nut. This washer will allow for a proper seating surface when using any True Spike Acorn lug nut, which all have 60-degree seats, with your typical dually flat wheel surface. For wheels that have a flat face where you cannot use an acorn lug nut. Specifications: Color: Black Finish: Zinc Plated Inside Diameter: 0.65" (21/32", 16.51mm) Material: Hardened Steel Outside Diameter: 1.35" (1-11/32", 34.29mm) Quantity: Sold in packs of 4  Seat: Cone/Tapered (60°) -TO- Flat Shape: Round Style Tapered/Ball Adapter Thickness: 0.31" (5-16", 7.87mm)...

More details ➞

    The Patented (D781,691) True Spike Tuner lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     The tuner lug nuts are for the customers that have wheels that need to use the thin tuner lug nuts. These lug nuts are longer and thinner that the usual standard 39MM-41MM acorn lug nuts. These lug nuts are 51MM long. These use a regular 17MM socket to screw them on and off. If you have wheels that need tuner lug nuts then these are the lug nuts you need.     These lug nuts are only available in 51MM length, so they will fit both cars and trucks.  We have lug nut sleeve covers that are specific to these lug nuts. You can buy them here:   Tuner Lug Nut Sleeve Covers     US Patent: D781,691...

More details ➞

    NEW True Spike Shank Lug nuts for stock wheels that use shank lug nuts, and the Weld and Cragar Style wheels. The True Spike lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber O-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The O-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These lug nuts are available in 2 shank lengths, 0.800 and 1.137, they use a 21MM socket to install and remove them. Lug nut sizing information: - Lug Nut Seat Style: Shank - Lug Nut Head Style: Standard - End Design: Closed end with threaded stud and rubber O-ring - Lug Nut Shank Length (in): 0.800 in. or 1.137 in. - Lug Nut Shank Diameter (in): 0.687 in. - Washer Included: Yes - Washer Shape: Round centered - Washer Outside Diameter (in): 1.070 in. - Lug Nut Material: Steel - Lug Nut Finish: Black - Wrench Size Required: 21MM - Quantity: Packaged in sets of 4....

More details ➞

         True Spike ball seat (radius) steel wheel washers. This washer will allow for a proper seating surface when using any True Spike Acorn lug nut, which all have 60 degree seats, with your typical European ball seat wheel that come in Volkswagen's, BMW's, Porsche's, Audi's, Mercedes Benz etc.. Specifications: Color: Black Finish: Zinc Plated Inside Diameter: 0.60" (39/64", 15.24mm) Material: Hardened Steel Outside Diameter: 0.960" (24/25", 24.38mm) Quantity: Sold in packs of 4  Seat: Cone/Tapered (60°) -TO- Ball/Radius Shape: Round Style Tapered/Ball Adapter Thickness: 0.25" (1/4", 6.34mm)...

More details ➞

    The Patented True Spike lug bolts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber O-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The O-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These lug bolts are available in 4 lengths, 24M, 28MM, 33MM and 40MM. We currently only have them available in 14x1.5MM thread.        You will need to measure you lug bolt thread length before you buy to make sure of the size you need.    Patent number: D792,201  ...

More details ➞

         The True Spike adapters to put our Dually Lug Nut Caps on the American Force direct fit wheels are finally here. Made of CNC machined billet aluminum and then anodized in black.           These are sold as a set with either our Spike or our Bullet lug nuts.          The American Force direct fit wheels have a center cap and the actual lug nuts will be under that cap, this will not change. These wheels also have 10 fake lug nuts that will be on the outside of the center cap. Our adapters will replace the fake lug nuts that you get from American Force, and you can now use our True Spike Dually Lug Nut Caps on top of these adapters.          Some builds will have front wheels that are direct fit and rear wheels that use adapters, in that instance you need to buy 20 pieces of adapters with lug nut caps for the front wheels, and then buy 20 pieces of our Dually Lug Nuts for the rear wheels. You can buy the Dually Lug nuts for your rear wheels here: - DUALLY SPIKE LUG NUTS - DUALLY BULLET LUG NUTS  ...

More details ➞

              Yes, the patented (patent number D792,204 and D793,219) True Spike dually/semi truck 33MM lug nuts are finally here. As seen on the Diesel Brothers show on the Discovery Channel. After over a year of development we have finally been able to perfect the design and start production on these. The Diesel Brothers have gotten all the prototypes and they are on their personal trucks, "the Muscle", "Heavy D", and "Diesel Dave" all run these on their personal trucks.               The kit comes with 40 forged steel lug nuts and 40 CNC machined billet lug nut caps that are cut from a solid piece of T-6061 aluminum bar stock. The caps screw onto the lug nuts and there is a rubber seal that puts pressure on the cap so that they will not screw off. Please use rubberized gloves to screw the caps in and out. Please do not over-tighten.                 These will only fit trucks with wheel adapters to mount 10 lug real dually wheels. Will not work on direct fit dually wheels that do not use adapters.                Will not fit the American Force Dually front wheel that is an 8 bolt direct fit wheel. Will only fit their 10 bolt wheels with adapters. You can now buy our adapters with caps for the American Force Direct fit wheels here: - ADAPTERS WITH CAPS FOR AMERICAN FORCE DIRECT FIT WHEELS ...

More details ➞

    The Patented True Spike lug bolts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These lug bolts are available in 4 lengths, 24M, 28MM, 35MM and 40MM. We currently only have them available in 12x1.5MM thread.        You will need to measure you lug bolt thread length before you buy to make sure of the size you need.    Patent number: D792,201  ...

More details ➞

    The Patented True Spike lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These are the new and long awaited True Spike ATV/UTV lug nuts. These are an acorn/bulge style lug nut for aftermarket wheels and some factory wheels. Will not fit wheels that use flat base lug nuts.      These 10x1.25 MM ATV/UTV lug nuts are 51MM long, so if you want to buy sleeves you need the sleeves for the 51MM long lug nuts.      Just buy the correct amount of lug you need and then you can choose the lug nut cap you like here: LUG NUT CAPS CLICK HERE      Don't forget your optional lug nut sleeve covers, look here: LUG NUT SLEEVE COVERS CLICK HERE   US Patent: D786,056...

More details ➞

    The Patented True Spike lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These are the new and long awaited True Spike ATV/UTV lug nuts. These are an acorn/bulge style lug nut for aftermarket wheels and some factory wheels. Will not fit wheels that use flat base lug nuts.      These 3/8-24 ATV/UTV lug nuts are 51MM long, so if you want to buy sleeves you need the sleeves for the 51MM long lug nuts.      Just buy the correct amount of lug you need and then you can choose the lug nut cap you like here: LUG NUT CAPS CLICK HERE      Don't forget your optional lug nut sleeve covers, look here: LUG NUT SLEEVE COVERS CLICK HERE   US Patent: D786,056...

More details ➞

Shopping for someone else but not sure what to give them?Give them the gift of choice with a VMS Racing/True Spike E-Gift Card. Available in amounts from $10 to $500. E-Gift Cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. E-Gift Cards are not available for purchase with Sezzle. If you’d like to purchase other items with Sezzle, please make a separate purchase for E-Gift card(s)....

More details ➞

          Want to add some bling and enhance the look of your aftermarket shackles, tow hooks, or recovery hooks? True Spike has the answer with the new True Spike Recovery Hook Shackle Pin Kit and it is just what you need! It includes a 3/4" diameter stainless steel pin, two C-clips, and two cool 51mm (2-inch) True Spike billet aluminum spikes.   Note: The assembled length of the pin and spikes is roughly 7 inches from tip to tip. Please make sure that your bumper has enough clearance before purchasing.                    Installation couldn't be easier —just insert the pin, clip it in place with the included C-clips, and screw on the spikes. Universal fitment, will work with any aftermarket brand recovery shackle or hook with a 3/4" diameter hole (Please measure your stock pin before purchasing).            We’ve test-fitted these on both Royal and Monster Hook brand shackles and hooks, and they fit without any issues. These two brands have a 1.10" opening.            This basic kit comes with 1 pin, 2 C-clips, and 2 spikes, which is enough for one shackle or hook. If you need them for 2 hooks, choose a pair from the dropdown. Features: -  Pin is made of T304SS Stainless Steel  -  3/4" Diameter -  Pin length: 3" or 78mm  -  2 C-Clips included  -  2 True Spike brand 51mm (2 inch) billet aluminum end spikes Included per pin -  Spikes are either hard anodized, triple chrome plated, painted (white only), or 24K gold plated for a long lasting and durable finish  -  Easy Installation ...

More details ➞