VMS Racing LIQUID FILLED 1 1/2" (38.1MM) O.D. mechanical 0-60 PSI fuel pressure gauge AND ADAPTER for the 2005-2010 Ford Mustang GT And Shelby GT500 with either the 4.6L or 5.4L engines. This comes with the VMS Racing CNC machined billet Aluminum hard anodized black fuel rail adapter for the 2005-2010 Mustangs with the V8 engines. The adapter has 2 outlets so you can put the gauge on one side and a use the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure gauge sender for a gauge that will be on the inside of the car etc... Gauge can be used as a fuel pressure, oil pressure, air pressure etc... gauge. Gauge will bolt on to a 1/8" NPT female port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED UNIT: Unlike basically EVERY other 1 1/2" in line gauge on the market, the VMS Racing gauge is permanently sealed, the plug can not be removed and will not leak. It does not have a removable rubber plug on the back, which always leaks and can be a fire hazard! Removable, leaky rubber plugs are BAD IDEA!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the gauge, will look great for years to come!3- VACUUM SEALED FOR ACCURACY: Gauge is vacuum sealed so that it will be minimally affected, or not affected at all by temperature changes. As you probably know, liquid filled gauges will vary the reading depending on the temperature, because of the expansion and contraction of the liquid inside the gauge. Since this gauge is vacuum sealed this issue is almost non-existent in these gauges!...

More details ➞

VMS Racing CNC machined billet aluminum fuel or nitrous pressure gauge adapter for :2005-2010 Ford Mustang GT and Shelby GT500 with either the 4.6L or 5.4L engines ONLY!Recommended for use when you Install a fuel pressure regulator, nitrous system, turbo kit or supercharger for a complete, accurate fuel delivery tuning system. Installs between the fuel rail and fuel pressure sensor. The adapter has 2 outlets so you can put a gauge on one side and a use the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure gauge sender for a gauge that will be on the inside of the car etc... Made of Aircraft Quality CNC Billet Aluminum and then Hard Anodized for a Long Lasting finishGauge Adapter Includes : - Gauge adapter. - 2 Mounting bolts. - 2 Washers. - 1 O-Ring. - No installation instructions included - Professional installation recommended. ...

More details ➞

VMS Racing LIQUID FILLED 1 1/2" (38.1MM) O.D. mechanical 0-100 PSI fuel pressure gauge AND ADAPTER for the 2005-2010 Ford Mustang GT And Shelby GT500 with either the 4.6L or 5.4L engines. This comes with the VMS Racing CNC machined billet Aluminum hard anodized black fuel rail adapter for the 2005-2010 Mustangs with the V8 engines. The adapter has 2 outlets so you can put the gauge on one side and a use the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure gauge sender for a gauge that will be on the inside of the car etc... Gauge can be used as a fuel pressure, oil pressure, air pressure etc... gauge. Gauge will bolt on to a 1/8" NPT female port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED UNIT: Unlike basically EVERY other 1 1/2" in line gauge on the market, the VMS Racing gauge is permanently sealed, the plug can not be removed and will not leak. It does not have a removable rubber plug on the back, which always leaks and can be a fire hazard! Removable, leaky rubber plugs are BAD IDEA!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the gauge, will look great for years to come!3- VACUUM SEALED FOR ACCURACY: Gauge is vacuum sealed so that it will be minimally affected, or not affected at all by temperature changes. As you probably know, liquid filled gauges will vary the reading depending on the temperature, because of the expansion and contraction of the liquid inside the gauge. Since this gauge is vacuum sealed this issue is almost non-existent in these gauges!...

More details ➞

      Do you have to buy an new set of those cheap Chinese aluminum spike lug nuts every time you take your wheels off as the strip? Are you afraid of taking you car to a shop if they have to remove the wheels as you know they will damage the aluminum lug nuts? Can you really even see those tiny puny spikes?    True Spike comes to the rescue yet again with an innovative and great looking product!!! NO MORE STRIPPED LUG NUTS!!! NO MORE BUYING THE SAME LUG NUTS OVER AND OVER AGAIN!!! NO MORE PUNY LITTLE SPIKES!!!    True Spike lug nuts are a totally unique design, that have multiple Patents Pending. The lower part of the lug nut assembly is manufactured out of CNC Machined Forged Steel, and the threaded spike is manufactured out of T6061 CNC Machined billet aluminum. The lug nuts are powder coated black and the spikes are hard anodized, for corrosion resistance and years of good looks. YOU CAN TORQUE THESE LUG NUTS TO FACTORY SPECIFICATION AND BEYOND! THE CNC MACHINED FORGED STEEL LUG NUT WILL NOT STRIP, EVER!!! ALSO THE SPIKE, WHICH IS WHAT YOU SEE,  WILL NEVER GET SCRATCHED, AS IT NEVER TOUCHES THE SOCKET!!!    This is the highest quality, best looking, most unique lug nut you can buy!   Patent number: D792,200 Patent number: D786,056 Patent number: D793,217  ...

More details ➞

     These are 25MM wide spikes at the bottom where they meet the lug nut, they will be a perfect match to the lug nuts sleeves as they are also 25MM wide. These spike with the round lug nut sleeves will create a seamless look on the lug nut, where you can not tell where the lug nut ends and where the spike starts, it will look like a one piece unit.       Do you have to buy an new set of those cheap Chinese aluminum spike lug nuts every time you take your wheels off as the strip? Are you afraid of taking you car to a shop if they have to remove the wheels as you know they will damage the aluminum lug nuts? Can you really even see those tiny puny spikes?    VMS Racing comes to the rescue yet again with an innovative and great looking product!!! NO MORE STRIPPED LUG NUTS!!! NO MORE BUYING THE SAME LUG NUTS OVER AND OVER AGAIN!!! NO MORE PUNY LITTLE SPIKES!!!    VMS lug nuts are a totally unique design, that have multiple Patents Pending. The lower part of the lug nut assembly is manufactured out of CNC Machined Forged Steel, and the threaded spike is manufactured out of T6061 CNC Machined billet aluminum. The lug nuts are powder coated black and the spikes are hard anodized, for corrosion resistance and years of good looks. YOU CAN TORQUE THESE LUG NUTS TO FACTORY SPECIFICATION AND BEYOND! THE CNC MACHINED FORGED STEEL LUG NUT WILL NOT STRIP, EVER!!! ALSO THE SPIKE, WHICH IS WHAT YOU SEE,  WILL NEVER GET SCRATCHED, AS IT NEVER TOUCHES THE SOCKET!!!    This is the highest quality, best looking, most unique lug nut you can buy! ...

More details ➞

VMS Racing LIQUID FILLED 1 1/2" (38.1MM) O.D. mechanical 0-100 PSI fuel pressure gauge AND ADAPTER for the 1986-1995 Ford Mustang 5.0L. This comes with the fuel rail 1/8" NPT to 1/16" NPT adapter that fits on the Schrader valve.. Gauge reads from 0-100 psi. Gauge can be used as a fuel pressure, oil pressure, air pressure etc... gauge. Gauge will bolt on to a 1/8" NPT female port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED UNIT: Unlike basically EVERY other 1 1/2" in line gauge on the market, the VMS Racing gauge is permanently sealed, the plug can not be removed and will not leak. It does not have a removable rubber plug on the back, which always leaks and can be a fire hazard! Removable, leaky rubber plugs are BAD IDEA!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the gauge, will look great for years to come!3- VACUUM SEALED FOR ACCURACY: Gauge is vacuum sealed so that it will be minimally affected, or not affected at all by temperature changes. As you probably know, liquid filled gauges will vary the reading depending on the temperature, because of the expansion and contraction of the liquid inside the gauge. Since this gauge is vacuum sealed this issue is almost non-existent in these gauges!...

More details ➞

                   VMS Racing Chrome Plated Billet Aluminum Oil Cap Cover for ALL the 1986-2014 Ford Mustang including the V6, GT, 5.0, LX, 96-98 Cobra, and the 2007-2014 Shelby GT500.                     The VMS Racing CNC Machined T6061 Triple Chrome Plated Billet Aluminum Oil Cap Cover installs in seconds without the need of any specialty tools. These work on an interference fit. If you put one on and it is a little loose, you can use some silicone under it, or double sided tape to secure it.Features:• CNC Machined from T6061 Billet Aluminum.• Triple chrome plated for good looks and lifelong protection.• Perfect fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

                   VMS Racing Chrome Plated Billet Aluminum Radiator Overflow Cap Cover for ALL the 1998-2014 Ford Mustang including the V6, GT, and 96-98 Cobra. Will also fit over the 2003-2004 Cobra, and 2007-2014 Shelby GT500 intercooler tank cap.                   The VMS Racing CNC Machined T6061 Triple Chrome Plated Billet Aluminum Radiator Overflow Cap Cover, or intercooler tank cap easily installs in minutes without the need of any specialty tools. These work on an interference fit.Features:• CNC Machined from T6061 Billet Aluminum.• Triple chrome plated for good looks and lifelong protection.• Perfect fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

      TWO (2) VMS RACING PRO SERIES REPLACEMENT coil packs for the 1996-1998 Ford Mustang GT and Mustang Cobra. They will directly connect to the factory connectors and deliver 15%-20% more spark energy for improved power and performance.      Increased spark energy and voltage, help improve the combustion process of the fuel mixture to create an efficient burn. The result are quicker starts, improved idle, improved throttle response, cleaner plugs, cleaner emissions plus increased high rpm performance!Replaces the following part number coils:F5OY12029B F5RZ12029A F5RZ12029C FSD718100 FD487 DG530 F1VU12029A2A F1VY12029A F37U12029AA F37Z12029A YS4U12029AA YS4Z12029AA ZZM018100 Other Part Number 4: F510 F5LU12029AA F5LY12029A F5OU12029AA F5OY12029A E8TZ12029A E9TF12029AA EE03A F1VU12029A1A DG449 DG454 DG457 DG458 DG460 DG461 E8TF12029AA 0297006700 19017116 88F12029A1A 928F12029CA DG435THIS WILL FIT FOLLOWING VEHICLES:1992-97 Ford Crown Victoria Ignition Coil for V8 4.6L1997-99 Ford E150 Van Ignition Coil for V8 4.6L1997-99 Ford E250 Van Ignition Coil for V8 4.6L1997-99 Ford E350 Van Ignition Coil for V8 4.6L1997-99 Ford Expedition Ignition Coil for V8 4.6L1997-99 Ford F150 Truck Ignition Coil for V8 4.6L1997-99 Ford F250 Light Duty Truck Ignition Coil for V8 4.6L1996-98 Ford Mustang Cobra Ignition Coil for V8 4.6L1996-98 Ford Mustang Ignition Coil for V8 4.6L 1994-97 Ford Thunderbird Ignition Coil for V8 4.6L1995-97 Lincoln Continental Ignition Coil for V8 4.6L1993-96 Lincoln Mark VIII Ignition Coil for V8 4.6L1991-98 Lincoln Town Car Ignition Coil for V8 4.6L1994-97 Mercury Cougar Ignition Coil for V8 4.6L1992-97 Mercury Grand Marquis Ignition Coil for V8 4.6LSPECIFICATIONS:• Turns Ratio 85:1• Primary Resistance 55 ohms • Secondary Resistance 13.5K ohms• Inductance 4.0 mH • Spark duration (mS) 1100 uS• Peak Current 140 mA• Maximum Voltage 40,000 Volts...

More details ➞

                   VMS Racing 10 piece Chrome Plated Billet Aluminum Strut Tower Cap Cover Kit for ALL  the 2005-2010 Ford Mustang including the V6, GT, and the Shelby GT500.                     The VMS Racing CNC Machined T6061 Triple Chrome Plated Billet Aluminum Strut Tower Cap Cover Kit installs in seconds without the need of any specialty tools. These just screw in. Features:• CNC Machined from T6061 Billet Aluminum.• Triple chrome plated for good looks and lifelong protection.• Perfect fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

             VMS Racing shift boot adapter clip WITH set screw in T-6061 billet aluminum that will fit most 2005-2014 Ford Mustang with manual transmissions including the 2005-2009 Shelby Mustang (WILL NOT FIT THE 2010-2014 SHELBY MUSTANG).               Don't limit your selection to only shift knobs with built-in boot retaining clips. From VMS Racing comes this billet aluminum shift boot retaining clip that allows you to hold the shift boot up independently on your shift knob. This allows the use of a wider variety of shift knobs on your 2005-2014 Ford Mustang.              Another major advantage is that you do not have to raise your shift knob with this boot retaining clip. Most of the shift boot adapter that are out there will make your shift knob sit 1 to 2 inches HIGHER THAN STOCK! This will make you shifts slower and less accurate. With this clip you can lower your shift knob as far down as you can, and still keep your boot in place!               Shift boot adapter is made to Work on Manual transmission vehicles ONLY.              VMS Racing shift boot adapters are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift boot adapter is beautifully hard anodized, to ensure a long lasting finish, and to provide years of trouble free service and looks.  Features: • Made of CNC machined T-6061 Billet Aluminum. • Includes set screw and allen key to set desired boot height. • Holds shifter boot up to allow the use of aftermarket shift knobs. • Easy 5 minute install....

More details ➞

VMS Racing LIQUID FILLED 1 1/2" (38.1MM) O.D. mechanical 0-60 PSI fuel pressure gauge AND ADAPTER for the 1986-1995 Ford Mustang 5.0L. This comes with the fuel rail 1/8" NPT to 1/16" NPT adapter that fits on the Schrader valve.. Gauge reads from 0-60 psi. Gauge can be used as a fuel pressure, oil pressure, air pressure etc... gauge. Gauge will bolt on to a 1/8" NPT female port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED UNIT: Unlike basically EVERY other 1 1/2" in line gauge on the market, the VMS Racing gauge is permanently sealed, the plug can not be removed and will not leak. It does not have a removable rubber plug on the back, which always leaks and can be a fire hazard! Removable, leaky rubber plugs are BAD IDEA!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the gauge, will look great for years to come!3- VACUUM SEALED FOR ACCURACY: Gauge is vacuum sealed so that it will be minimally affected, or not affected at all by temperature changes. As you probably know, liquid filled gauges will vary the reading depending on the temperature, because of the expansion and contraction of the liquid inside the gauge. Since this gauge is vacuum sealed this issue is almost non-existent in these gauges!...

More details ➞

VMS Racing Billet Aluminum Oil Dipstick handle with new Vitton o-rings for the 1996-2000 Ford Mustang with the 3.8L V6 only! The VMS Racing CNC Machined T6061 billet Aluminum oil dipstick handle will fit the 1996-2000 V6 3.8L Ford engines. It easily installs in minutes without the need of any specialty tools. You simply slide out the retaining pin on the Ford plastic handle, using the included pin removal tool, and install on the VMS handle using the new pin that is supplied with the kit. This is a great piece for anyone looking to enhance the look of their engine compartment without spending a ton of money, it will also match the VMS racing oil caps and other VMS billet accessories for the Ford engines. You can now replace that ugly yellow handle that is missing, broken, cracked or just plain ugly.Features:• CNC Machined from T6061 Billet Aluminum.• Hard anodized, for good looks and lifelong protection.• Direct replacement fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

VMS Racing Billet Aluminum Oil Dipstick handle with new Vitton o-rings for the 1999-2015 Ford Mustang GT and Shelby GT500 ONLY! The VMS Racing CNC Machined T6061 billet Aluminum oil dipstick handle will fit the 1999-2015 4.6L and 5.4L Ford engines. It easily installs in minutes without the need of any specialty tools. You simply slide out the retaining pin on the Ford plastic handle, using the included pin removal tool, and install on the VMS handle using the new pin that is supplied with the kit. This is a great piece for anyone looking to enhance the look of their engine compartment without spending a ton of money, it will also match the VMS racing oil caps and other VMS billet accessories for the Ford engines. You can now replace that ugly yellow handle that is missing, broken, cracked or just plain ugly.Features:• CNC Machined from T6061 Billet Aluminum.• Hard anodized, for good looks and lifelong protection.• Direct replacement fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

VMS gauge adapter fitting 1/16" NPT Male to 1/8" NPT Female adapter for Ford fuel rail. This VMS gauge adapter will allow you to install a 1/8 NPT gauge, or a gauge sender, directly to your 1986-1995 Ford Mustang 5.0 Fuel Rail. You just remove the Schrader valve that is on the fuel rail and install the VMS adapter and then install the gauge or gauge sender...

More details ➞

The VMS Racing CNC Machined T6061 billet aluminum door lock pulls replace the stock door lock pulls for a unique custom look. Will make you ride stand apart from the rest! Comes with an 8-32 thread pitch. Available in silver and black anodized finish, and also triple chrome plated. These fit the 1965 and 1966 Mustang, they probably fit other Ford vehicles.                                               SOLD AS A PAIR(2) Features: • CNC Machined from T6061 billet aluminum. • Triple Chrome Plated, or anodized black or silver for good looks and lifelong protection. • Direct replacement fit. • 8-32 thread pitch. • Beautifully finished. • Easy to install....

More details ➞

The VMS Racing CNC Machined T6061 billet aluminum door lock pulls replace the stock door lock pulls for a unique custom look. Will make you ride stand apart from the rest! Comes with an 10-24 thread pitch. Available in silver and black anodized finish, and also triple chrome plated. These fit the 1967 and 1970 Mustang, they probably fit other Ford vehicles.                                               SOLD AS A PAIR(2) Features: • CNC Machined from T6061 billet aluminum. • Triple Chrome Plated, or anodized black or silver for good looks and lifelong protection. • Direct replacement fit. • 10-24 thread pitch. • Beautifully finished. • Easy to install....

More details ➞

          VMS Racing BEADLOCK Drag Race Drag Pack, two front and two rear V-Star 17x10 SINGLE BEADLOCK (+54 offset/7.6" backspacing) & 18x5" 5X114.3 (-12 offset) wheels are currently available only in black milling.  Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350 or the S197 or S550 GT500). This wheel will fit the S197 and S650 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This SINGLE BEADLOCK wheel will fit the S197, S550, and S650 Mustangs EXCEPT the GT350, GT500, and the S650 PP or Darkhorse with no issue.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.           WILL NOT FIT THE S550 GT350/GT500 MUSTANG or S197 GT500! Features: - 18x5: 20 pounds each. - 17x10: 25 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear Black Hawk 17x10 (54 offset) & 18x5" 5X114.3 (-12 offset) wheels are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350). This wheel will fit the S197 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This wheel will fit both the S197 and S550 Mustangs EXCEPT the GT350 with no issues.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      WILL NOT FIT THE 2015-2022 GT350 MUSTANG! Features: - 18x5: 20 pounds each. - 17x10: 22 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear Modulo 17x10 (54 offset) & 18x5" 5X114.3 (-12 offset) wheels are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350). This wheel will fit the S197 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This wheel will fit both the S197 and S550 Mustangs EXCEPT the GT350 with no issues.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      WILL NOT FIT THE 2015-2022 GT350 MUSTANG! Features 17x10 wheels: - 22 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved. Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved....

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear V-Star 17x10 (54 offset) & 18x5" 5X114.3 (-12 offset) wheels are currently available in a black milling, all black Dark Series (also milled), and black milling with a polished finish. Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350 or GT500). This wheel will fit the S197 (2005-2014) Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages, and will fit the S650 but only with the standard GT brakes, will not fit with the Performance Package Brembo brakes or the Darkhorse. Rear 17x10 wheel information:       This wheel will fit both the S197, S550, and S650 Mustangs EXCEPT the S550 GT350/GT500 and the S650 PP or DARKHORSE with no issue.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. WILL NOT FIT THE S197 W/Brembo, S550 GT350/GT500, S650 PP or Darkhorse! Features: - 18x5: 20 pounds each. - 17x10: 22 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear V-Star 17x10 (54 offset) & 18x5" 5X114.3 (-25.4 offset) wheels are currently only available in black milling. Front 18x5 wheel information:          This NEW (as of October 2024) -25.4 offset wheel was designed specifically for the S197 Mustangs to clear the Performance Package Brembo front brakes including the GT500.  Rear 17x10 wheel information:       This wheel will fit both the S197, S550, and S650 Mustangs EXCEPT the S550 GT350/GT500 and the S650 PP or DARKHORSE with no issue.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 18x5: 20 pounds each. - 17x10: 22 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs with the OEM 4 lug 4x108 bolt pattern. You get two 15x10" 4x108 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 4x108 -13 offset (1.75" backspacing) wheels. These wheels are available in black or silver milling.      These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs with the OEM 4x108 bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on some cars with rear disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 12 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs with the OEM 4 lug 4x108 bolt pattern. You get two 15x10" 4x108 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 4x108 -13 offset (1.75" backspacing) wheels. These wheels are currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs with the OEM 4x108 bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18.5 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 11 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs THAT HAVE BEEN CONVERTEED TO THE FORD 5X114.3 (5X4.5") bolt pattern. You get two 15x10" 5X114.3 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 5X114.3 -13 offset (1.75" backspacing) wheels. These wheels are available in black or silver milling.      These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs that have been converted to the Ford 5x114.3 (5x4.5") bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on some cars with rear disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 12 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

VMS Racing Red 14" 2 Piece Slotted Rotor Front Big Brake Kit for 2015-2021 V6, EcoBoost, and GT Mustangs. Are you looking for a racing-style track ready braking system, with a light weight 2 piece rotor, with unmatched stopping power for your 2015-2021 V6/ EcoBoost/ GT Mustang that is truly affordable? There is no need to look any further as VMS Racing has come out with an all-new Red 14" Slotted 2 Piece Rotor Front Big Brake Kit. Every kit comes with high temperature, high friction race compound pads, and premium grade fasteners. Features and Benefits: - Provides Better Braking Capability - Red Powder Coated 4-Piston Front Calipers - Race Style Brake Kit - Track ready - 14” 2 Piece Light Weight Slotted Rotor with Aluminum Hat - Aluminum Rotor Hat - Can save up to 6 pounds over your stock rotor - Bolt-on-installation Rotors mount to the hubs with forged aluminum hats, and radial mount brackets secure the caliper to the spindle in the OE location without modification. Reuses your stock brake lines.  Specifications: - Spindle Type: Factory Disc Spindles - Mount Type: Radial - Caliper Type: 4-Piston Red Powder Coated Calipers  - Rotor Diameter: 14” - Min Wheel Diameter Required: 18” Vehicle Fitment: -2015-2021 V6/ EcoBoost/ GT Mustangs Please Note: We recommend using an 18" or larger wheels with this 14" front brake kit to ensure proper clearance...

More details ➞

      VMS Racing 10 Hole Phone Dial 15x3.5" 4x108 -13 offset (1.75" backspacing) wheel is currently available in black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 4x108 bolt pattern.    Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo dual bolt pattern 4x108 and 4x114.3 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 4x108 or 4x114.3 bolt pattern.    Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial 15x3.5" 5x114.3 (5x4.5") -13 offset (1.75" backspacing) wheel is currently available in black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 5x114.3 (5x4.5") bolt pattern.    Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x114.3 (5x4.5") 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - Ford/Mercury Muscle Car era cars with 5x4.5" bolt pattern. Mustang, Fairlane, Torino, Cougar etc... Will fit some modern Fords, like most Fox Body Mustangs with 5 lug conversions, but a lot of the late model cars have front rotors and calipers that are way too big for a 15" wheel. - Dodge/Plymouth Muscle Car era cars with 5x4.5" bolt pattern. Roadrunner, GTX, Charger, Challenger, Barracuda, Cuda, Satellite, Belvedere etc...    Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Drag Race V-Star 15X3.5" 4 lug wheel is currently only available in black milling. Can be used on certain vehicles as a rear drag wheel too. This wheel was specifically designed for the 1979-1993 Fox Body Mustangs. It has a non-tapering 73.1mm center bore, and a special center cap to clear the brake rotor on those cars.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal, VIA and JLL approved....

More details ➞

              Modulo machined billet aluminum shift knobs, are the latest shift knobs from VMS Racing. Combining the modern machined billet aluminum look with the popular matte anodized finish, and a universal DIRECT SCREW IN FIT.             These shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is matte anodized and then final machined for the incredible two tone machined look that these shift knobs have. Look at the photos, the finish looks amazing!            Each shift knob includes 6 screw in adapter for use on almost any vehicle with a manual transmission, or an automatic transmission that uses the popular 8x1.25MM Thread.             Available in 3 different styles, the short, the long, and the round Teardrop version.            The long and short versions come with shift 4 different shift patterns that will match most manual transmission vehicles, look at the photos.           When installing the shift knob you just find the correct adapter for you shifter, you screw correct adapter into the shift knob and then simply screw in the shift knob to your shifter. There is no need for a locking nut, as the last thing you will do is to put the shift pattern emblem on the knob after it it completely tightened down, so your shift pattern will always end up straight.                                 Shifter thread size chart, click here FEATURES: • CNC Machined from T6061 billet aluminum, then beautifully anodized, then final machined and clear coated.• Direct bolt-on with no modifications required.• 6 adapters included. • 4 different shift pattern emblems, for 5 and 6 speed vehicles, for the long and short versions are included.• Look at the photos, finest quality shift knob available.• Easy to install. ADAPTERS INCLUDED: • 10X1.5 MM • 10X1.25 MM • 12X1.25 MM • 16X1.5 MM • 8X1.25 MM • 12X1.75 MM SPECIFICATIONS MODULO SHORT: • Length: 3 inches. • Diameter: 1.5 inches. • Weight: 6 ounces SPECIFICATIONS MODULO LONG: • Length: 5 inches. • Diameter: 1.5 inches. • Weight: 9 ounces SPECIFICATIONS MODULO TEARDROP: • Length: 3.5 inches. • Diameter: 2 inches. • Weight: 8 ounces...

More details ➞

VMS RACING DIRECT FIT POLISHED 75MM 1996-2004 Ford Mustang 4.6L SOHC 2 Valve Throttle Body. VMS Racing is proud to introduce its brand new POLISHED 75MM Street/Strip Series Racing Throttle Body for 96-04 Ford Mustang with the 4.6L SOHC 2 Valve engines (will not fit the F150 trucks or the DOHC Cobra engines). These throttle bodies are cast, just like the original OEM Ford throttle bodies, they are finished machined using the latest in CNC machines in an ISO 9001 certified factory. This throttle body fits just like an OEM throttle body. VMS Racing's 75MM Street/Strip Series Throttle Body is designed to be used with aftermarket intake manifolds as well as your OEM intake manifold for easy bolt-on horsepower and torque gains by maximizing your engines airflow. Each VMS Racing throttle body doesn't just provide more airflow, they also retain smooth drive-ability and OEM throttle characteristics. Each VMS Street/Strip Throttle Body is designed using the latest CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) equipment, which results in a unit that exceeds OEM standards. VMS Street/Strip Throttle Bodies are cast using the latest in sand molding technology and then CNC finished machined. After all the machining is done they are beautifully polished. The VMS Throttle Body reuses the stock TPS sensor. Throttle Body is compatible with your OEM throttle cable, which will simplify your installation. They also feature sealed bearings for smooth operation. A new reusable throttle body gasket and new stainless steel hardware is included for a trouble-free install. A larger throttle body is key to producing additional power on modified engines that have increased airflow demands. VMS’s Street/Strip Throttle Bodies for the Ford 4.6L SOHC 2V engines feature a large, 75MM bore, which results in significant horsepower gains on modified naturally aspirated applications, and even more on forced induction ones. Specifications: • OEM style casting, using the latest in sand molding technology and CNC machine finished and the beautifully polished, increases horsepower and torque. • CNC Machined to .001 Tolerances. • DIRECT FIT. Uses stock throttle cables and TPS sensors. Fits the following vehicles: • 1996-2004 Ford Mustangs with the 4.6L SOHC 2 Valve engines. WILL NOT FIT THE COBRA DOHC ENGINES OR THE F150'S!...

More details ➞

       VMS Racing Street/Drag Race Black Hawk 17x10" 5X114.3 with 54 offset wheel is currently available in black milling. This wheel fits great on the S197 and S550 Mustangs. We will also be coming out soon with a matching 18x5 front wheel also specifically made for the S550 Mustangs to clear the performance package Brembo front brakes.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                   WILL NOT FIT THE 2015-2023 GT350/GT500 MUSTANG! Features: - 22 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Street/Drag Race Black Hawk front 18X5" 5X114.3 with -12 offset wheel is currently only available in black milling. This wheel was designed specifically for the S550 Mustangs (2015 to present) to clear the front brakes including the GT with the performance package Brembo brakes. This wheel will fit the S197 (2005-2014) Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. We also have a 17x10 rear wheel also specifically made for the S550 and S197 Mustangs.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.               WILL NOT FIT THE 2015-2023 GT350 or 2022-2023 GT500 MUSTANG! Features: - 20 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Street/Drag Race Modulo front 18X5" 5X114.3 with -12 offset wheel is currently only available in black milling. This wheel was designed specifically for the S550 Mustangs (2015 to present) to clear the front brakes including the GT with the performance package Brembo brakes. This wheel will fit the S197 (2005-2014) Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. We also have a 17x10 rear wheel also specifically made for the S550 and S197 Mustangs.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.               WILL NOT FIT THE 2015-2023 GT350 or 2022-2023 GT500 MUSTANG! Features: - 20 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Street/Drag Race V-Star front 18X5" 5X114.3 with -12 offset wheel is currently available in black milling, all black Dark Series (also milled), or black milling with a polished lip. This wheel was designed specifically for the S550 Mustangs (2015-2023) to clear front brakes including the GT with the performance package Brembo brakes. This wheel will fit the S197 (2005-2014) Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages, and will fit the S650 but only with the standard GT brakes, will not fit with the Performance Package Brembo brakes or the Darkhorse. We also have a 17x10 rear wheel also specifically made for the S650,  S550, and S197 Mustangs.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. WILL NOT FIT THE S197 W/Brembo, S550 GT350/GT500, S650 PP or Darkhorse! Features: - 20 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Street/Drag Race V-Star front 18X5" 5X114.3 with -25.4 offset (2" backspacing) wheel is currently only available in black milling. This wheel was designed specifically for the S197 Mustangs (2005-2014) to clear the front Brembo brakes of cars with the performance package and the GT500.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 20 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

       VMS Racing Street/Drag Race Modulo 17x10" 5X114.3 with 54 offset wheel is currently available in black milling. This wheel fits great on the S197 and S550 Mustangs. We will also be coming out soon with a matching 18x5 front wheel also specifically made for the S550 Mustangs to clear the performance package Brembo front brakes.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                          WILL NOT FIT THE 2015-2022 GT350 MUSTANG! Features: - 23 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

       VMS Racing Street/Drag Race V-Star 17x10" 5X114.3 with 54 offset wheel is currently available in black milling, all black Dark Series (also milled), and black milling with polished lip. This wheel fits great on the S197 and S550 Mustangs. We also have a 18x5 front wheel also specifically made for the S550 Mustangs to clear the performance package Brembo front brakes.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. WILL NOT FIT THE S197 W/Brembo, S550 GT350/GT500, or the S650 PP or Darkhorse! Features: - 22 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race V-Star 18x9.5" 5x114.3 (5X4.5) with 35 offset (6.5 backspace) wheel is currently only available in black milling.            Will fit the S197 2005-2014 Ford Mustangs WITHOUT the Brembo brakes.           Will fit the S550 2015-2023 Ford Mustangs including the GT with the Brembo brakes, but WILL NOT FIT the GT350's or the GT500's.           VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                                        FITS 2011-2021 Honda Civic Features: - 24 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race V-Star 18x9.5" 5x114.3 (5X4.5) with 40 offset (6.75 backspace) wheel is currently only available in black milling.            Will fit the S197 2005-2014 Ford Mustangs WITHOUT the Brembo brakes.           Will fit the S550 2015-2023 Ford Mustangs including the GT with the Brembo brakes, but WILL NOT FIT the GT350's or the GT500's.           VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                                       FITS 2011-2021 Honda Civic Features: - 24 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial wheel in 15x10" 4x108 20mm offset (6.3" of backspacing). This wheel is currently available in either black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo dual 4 lug bolt pattern 4x100 and 4x108 15x10" 20mm offset (6.3" of backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial wheel in 15x10" 5X114.3 (5X4.5") 20mm offset (6.3" of backspacing). This wheel if for the Fox Body Mustang that has been converted to the Ford 5x114.3 (5x4.5") bolt pattern. This wheel is currently available in either black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x114.3 (5x4.5") 15x10" wheel is currently only available in black milling. You can get either a 20mm offset (6.3" of backspacing) or a 50mm offset (7.5" backspacing).       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.         These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1996-2004 Ford Mustang with live axle will use 15x10 with 7.5" backspacing. Everything should clear. - 1979-1993 Fox Body Mustang with 5 lug conversion will use 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

             VMS Racing shift boot adapter in T-6061 billet aluminum that will fit most Subaru, Toyota, Ford Focus and 2005-2014 Mustang vehicles with manual transmissions. VMS Racing shift boot adapters are threaded to manufacturer standards for easy installation, no need for drilling or tapping.               The thread of this shift boot adapter is 12x1.25 mm and might fit other brands of vehicles that have the same shift knob thread. Shift boot adapter is made to Work on Manual transmission vehicles ONLY.              VMS Racing shift boot adapters are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift boot adapter is beautifully hard anodized, to ensure a long lasting finish, and to provide years of trouble free service and looks.  Features: • Made of CNC machined T-6061 Billet Aluminum. • Direct bolt-on with no modifications required. • Will work on both 5 and 6 speed transmissions. • Holds shifter boot up to allow the use of aftermarket shift knobs. • Easy 5 minute install....

More details ➞

This is the coolest looking (this thing looks awesome!) VMS Racing Rally WITH Flaming Mustang shift knob (flaming mustang is on both sides) ROUND BALL style 6 speed screw in shift knob for the 2015-2017 Ford Mustangs with the recess for the reverse lockout. Will also fit the Ford Focus and Fiesta that are equipped with the reverse lockout shifter. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. Installation will require a small amount of Loctite to secure the shift knob to the shifter. It is highly recommended that you use a Loctite adhesive that is NOT permanent so that the shift knob will not be damaged if you need to remove it in the future. *** WILL NOT FIT THE 2015-2017 MUSTANG SHELBY GT350 as they have a different thread on them! *** VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is finished using the latest in water transfer printing technology. After it is finished the clear coat is applied and polished to a high luster shine to ensure a long lasting finish, and to provide years of trouble free service and looks. The color and lettering will not rub off or loose it shine. Look at the photos, finish looks like porcelain! Features: • Billet Aluminum with water transfer technology, beautiful clear coated with UV protection. • Direct bolt-on with no modifications required. • Weighs 6 ounces and measures 2 inches in diameter. • Look at the photos, best quality available. • Easy to install....

More details ➞