VMS Racing rear wing stabilizer for: 2004-2007 Subaru Impreza WRX STi 4 door sedan with factory installed rear wing. Will also work on a regular Impreza that had an STi wing added to it.COOLEST LOOKING ACCESSORY FOR THE 04-07 STi!MAKE YOURS STAND OUT FROM THE CROWD! This rear wing stabilizer kit includes a 2 strips of 3M double sided tape and stainless steel bolts. The VMS wing stabilizers are manufactured of high quality, and super strong automotive grade ABS molded plastic and are UV treated so they wont fade from prolonged exposure to sunlight, and the elements. The VMS Racing STI Wing Stabilizer will reduces the flex and bounce in your rear OEM wing while adding WRC styling. The VMS Wing Stabilizer will fit perfectly in between the wing and the trunk lid, the Wing Stabilizer will provide support for your wing, and will eliminate excessive vibration and vertical movements, eradicating that annoying bounce in the wing. You simply place the stabilizer or stabilizers (depending on how many you want to install) under the wing and secure it using the included 3M tape. This makes installation a breeze. Installation is fairly simple. The rear wing has to be unbolted from the car. There are three bolts that hold the wing on each side of the trunk, you need to remove the bolts and loosen the wing. When you look under the wing you will see 5 sets of 2 screws. The upper part of the wing stabilizer will be bolted onto these. So you remove the appropriate number of screws that are under the wing so that you can bolt on the wing stabilizer. When you receive the wing stabilizer, it has no holes, but it is marked with cross hairs on the top of it to where you need to drill the two holes with an 11/64" drill (not included). After you drill the stabilizers, you put the 3M tape on both sides of the stabilizer, and you bolt them to the top and tape them to the bottom.  ...

More details ➞

VMS Racing Rear Wing Riser Kit for: - 2008-2014 Subaru STi Hatchback with factory installed rear wing. Will also work on a regular Impreza that had an STi wing added to it. - 2009-2014 Subaru WRX Hatchback. WILL NOT FIT 2008 Subaru WRX Hatchback UNLESS it has been upgraded with the STi wing. - WILL NOT FIT 2008-2011 Subaru Impreza Hatchback UNLESS it has been upgraded with the STi wing.COOLEST LOOKING ACCESSORY FOR THE 08-14 IMPREZA/WRX/STi!MAKE YOURS STAND OUT FROM THE CROWD! This rear wing stabilizer kit includes 6 aluminum riser blocks, 2 rear hatch cable limiters with 2 brackets, Stainless Steel hardware, black vinyl to cover hatch where cables will touch the hatch, and vinyl applicator. The VMS Racing Rear Wing Riser Kit will lift the rear wing up off the hatch for much more aggressive look and better air flow. The VMS Racing wing riser kit is angle and height adjustable. You can now dial in the exact look you want. The height is adjustable from 1.1" to 1.7" and the angle is adjustable from 0 - 4 degrees. Having the wing spaced from your rear window will keep the glass much cleaner, as now the air will travel down across the window instead of swirling under the wing. The VMS Racing wing riser blocks are manufactured of T6061 billet aluminum which are hard anodized black for corrosion protection and great looks. All the hardware is stainless steel and will never rust. The hatch limiter cables are made of vinyl coated Stainless Steel wire. These Stainless Steel limiter cables are included, because the wing is now taller you have to limit the travel of the trunk lid, or it would have interference with the roof. The limiters will reduce the travel of the trunk lid by about 25%.Installation is fairly simple. In short, the rear wing has to be unbolted from the car. The spacers go in between the wing and the hatch, vinyl is applied where the cable limiters can touch the hatch, the cable limiters are installed and adjusted and you are basically done. ...

More details ➞

VMS Racing Radiator Stay Brackets with Stainless Steel Bolts and Allen wrench for the 2008-2016 Subaru Impreza/WRX/STi. The VMS Racing Subaru Impreza Radiator Stay Brackets are manufactured completely from 1/4" (.250) thick billet AL7075-T6 Aluminum. 7075-T6 Aluminum has an ultimate tensile strength of 74,000–78,000 psi (510–572 MPa) and yield strength of at least 63,000–69,000 psi (434–503 MPa) which is comparable to steel, but at a fraction of the weight. One interesting use for 7075 is in the manufacture of M16 rifles for the American military. Each kit comes with Stainless Steel bolts, Allen wrench and are beautifully anodized for maximum durability and incredible looks. These radiator stay brackets are a direct replacement for the stamped steel radiator stay brackets that come with the car. You need to reuse the factory rubber isolation bushing, just remove it from the stock brackets and use them on the VMS brackets....

More details ➞

VMS Racing rear wing stabilizer for: 2011-2014 Subaru Impreza WRX STi 4 door sedan with factory installed rear wing. Will also work on a regular Impreza that had an STi wing added to it. COOLEST LOOKING ACCESSORY FOR THE 11-14 STi!!! MAKE YOURS STAND OUT FROM THE CROWD! This rear wing stabilizer kit includes a 4 strips of 3M double sided tape. The VMS wing stabilizers are manufactured of high quality, and super strong automotive grade ABS molded plastic and are UV treated so they wont fade from prolonged exposure to sunlight, and the elements. The VMS Racing STI Wing Stabilizer will reduces the flex and bounce in your rear OEM wing while adding WRC styling. The VMS Wing Stabilizer will fit perfectly in between the wing and the trunk lid, the Wing Stabilizer will provide support for your wing, and will eliminate excessive vibration and vertical movements, eradicating that annoying bounce in the wing. You simply place the stabilizer or stabilizers (depending on how many you want to install) under the wing and secure it using the included 3M tape. This makes installation a breeze. Installation is fairly simple, this is a peel and stick product, but you should have 2 people doing it so that one can push up on the wing and the other can align the stabilizers correctly. You need to measure and when you are sure you have marked where you want them on your trunk, double check your measurements and markings to make CERTAIN that you put them exactly where you want them. More than one wing stabilizer can be installed on a wing, but anything beyond 2 will require material to be removed from lower section of the stabilizer. This needs to be done because the rear section of the trunk curves away from the rear section of wing, causing the stabilizer to hang off the back of car. IMPORTANT: This also will require an additional piece of tape on the stabilizer mounted in the center of the wing to take up additional space. After you install them you may notice small gaps between the wing and the stabilizer. The 3M foam tape will slowly conform to the vehicle and the gaps should disappear after a day. We ARE NOT responsible for the loss of your VMS Wing Stabilizers from excessive speed or from improper installation. Fits the following vehicles: - 2011-2014 Subaru Impreza WRX STi sedan with factory rear spoiler. Features: - Eliminates Wing Bounce. - Looks cool as hell! - Molded from black automotive grade ABS plastic with a black OEM like texture. - Can be painted to match OEM color.  ...

More details ➞

VMS Racing Shifter Bushing for the 2015-2016 Subaru WRX (will also fit the 2010-2015 Legacy GT and the 2014-2016 Forester manual), with the 5 speed manual transmission. WILL NOT FIT THE STi. Check out the new VMS brass shifter bushing for the 2015-2016 Subaru WRX. The VMS Racing brass bushing will reduce the shifter end play, removing the sloppy feel that your shifter has during quick gear changes, giving you a more precise feel when shifting, especially during that crucial 2nd to 3rd power shift. Will help eliminate missed shifts. The VMS Racing shifter bushing is made of solid brass with strategically placed Viton O-rings which will eliminate slop while still allowing natural drive-train movement. THE VMS shifter bushing simply replaces the OEM rubber shifter bushing. Very easy to install with no special tools required....

More details ➞

VMS Racing Shifter Stop for the 2015-2016 Subaru WRX, does not fit the STi. The VMS Racing Shifter Stop is designed to bolt directly to the factory shifter. The stop is made from a solid piece of 6061-T6 billet Aluminum which will allow for countless downshifts without worry of damaging the VMS Shifter stop or the factory shifter. Due to the sloppy clearances of the internals in the transmission, there is an unacceptable amount of horizontal slop within the first and the second gear shifter gates. What in reality should be little to no play, ends up being nearly ONE inch of play! This play is very disorienting and confusing, you never know in what gear you are in. The VMS Racing Shifter Stop cures this malady, effectively reducing the horizontal movement to 0.12 of an inch. Includes hardware that removes the existing gap in the factory shifter assembly. Further reducing unwanted lateral movement of the shifter....

More details ➞

CNC MACHINED BILLET STEEL Zinc Plated VMS Racing Short Shifter Adapter for the 2015-2016 Subaru WRX with the 5 speed manual transmission, does not fit the STi. Will also fit the 2011-2015 Legacy GT with the manual transmission. The VMS Racing WRX Short Shifter Adapter will shorten your shifter travel by 30% without having to replace or cut the length of the shifter rod. The VMS Racing Shifter Adapter is designed to bolt directly to the factory shifter. The stop is made from a solid piece CNC Machined Billet Steel. Can also be used with the VMS Brass Shifter Bushing Kit for better feel....

More details ➞

VMS Racing rear wing stabilizer for: 2015-2018 Subaru Impreza WRX STi 4 door sedan with factory installed rear wing. Will also work on a regular Impreza that had an STi wing added to it. COOLEST LOOKING ACCESSORY FOR THE 15-18 STi!!! MAKE YOURS STAND OUT FROM THE CROWD! This rear wing stabilizer kit includes a 4 strips of 3M double sided tape. The VMS wing stabilizers are manufactured of high quality, and super strong automotive grade ABS molded plastic and are UV treated so they wont fade from prolonged exposure to sunlight, and the elements. The VMS Racing STI Wing Stabilizer will reduces the flex and bounce in your rear OEM wing while adding WRC styling. The VMS Wing Stabilizer will fit perfectly in between the wing and the trunk lid, the Wing Stabilizer will provide support for your wing, and will eliminate excessive vibration and vertical movements, eradicating that annoying bounce in the wing. You simply place the stabilizer or stabilizers (depending on how many you want to install) under the wing and secure it using the included 3M tape. This makes installation a breeze. Installation is fairly simple, this is a peel and stick product, but you should have 2 people doing it so that one can push up on the wing and the other can align the stabilizers correctly. You need to measure and when you are sure you have marked where you want them on your trunk, double check your measurements and markings to make CERTAIN that you put them exactly where you want them. More than one wing stabilizer can be installed on a wing, but anything beyond 2 will require material to be removed from lower section of the stabilizer. This needs to be done because the rear section of the trunk curves away from the rear section of wing, causing the stabilizer to hang off the back of car. IMPORTANT: This also will require an additional piece of tape on the stabilizer mounted in the center of the wing to take up additional space. After you install them you may notice small gaps between the wing and the stabilizer. The 3M foam tape will slowly conform to the vehicle and the gaps should disappear after a day. We ARE NOT responsible for the loss of your VMS Wing Stabilizers from excessive speed or from improper installation. Fits the following vehicles: - 2015-2018 Subaru Impreza WRX STi sedan with factory rear spoiler. Features: - Eliminates Wing Bounce. - Looks cool as hell! - Molded from black automotive grade ABS plastic with a black OEM like texture. - Can be painted to match OEM color.  ...

More details ➞

       VMS Racing Subaru Billet Aluminum Battery Tie Down. Available in 4 anodized matte colors: Red, Blue, black and Gun Metal.      Are you tired of looking at the cheap black stamped steel factory battery tie down, that is all rusty with flaking paint? Well VMS Racing comes back to the rescue with their new T6061 CNC Machined billet aluminum battery tie down. Fits the following vehicles: 2004-2017 Subaru STI 2013-2015 Subaru BRZ 2013-2015 Subaru Crosstrek 2004-2015 Subaru Forester XT 2002-2017 Subaru WRX 1993-2015 Subaru Impreza   ...

More details ➞